Tag Archives: ironing board cover DIY

Sewing Around the House: A few easy projects!

I’ve been friends with my sewing machine for a bit now, and we have grown closer over the past year. I have kept her near me and loved her very much, but one thing is that I have not been very good about covering her. One reason is because I have the old  (ugly) plastic cover that it came with.

mushpa mensa sewing

I got inspired and decided to make her a little outfit using refurbished material and gifted fabric! Now my sewing machine is not so cold, wont get so much dust, and actually looks pretty!

sewing machine mushpa y mensa

Tip: I used the old plastic cover to draft and cut out the pattern pieces to make the sewing machine cover. You don’t need a pattern as long as you have the old cover. If you  are not afraid to go for it, you can just measure the height and width of your machine and make five rectangles to sew together!

For this project, I  also used  as a guide this sewing book that I like very much, the Sew Everything Workshop: The Complete Step-by-Step Beginner’s Guide. It is written by Diana Rupp, and it is fabulous for people getting into the sewing world. It comes with patterns, instructions and lots of practical information about different fabrics and tips as well as historical facts and fun sewing projects.

sew everything workshop diana rupp

This book was part of a gift from Mushpa, who not only included the book, but a class to sew a “Naughty Secretary Skirt” with Ms. Diana Rupp herself! If you live in NYC and want to practice some guided sewing, check out the Make Workshop for amazing classes of  all types!

Tip: Get a sewing book. There are TONS out there. I have a couple that I use as reference all the time. I think it’s helpful for little details, how-to and random information. Any time I get stuck in a project, or need inspiration, I look at them. Also, if you can, take a sewing class. It really helps with understanding the process as a whole, and you get to hang with other sewing aficionados!

make everything workshop diana ruppI also got inspired and made some new yoga pants as well using this book! With some risky adjustments to the pattern, I had just enough scrap fabric to make some  new pants by refurbishing old curtains! Sound of Music anyone?

Fortunately the adjustments that I made to the pattern were fine, and I was able to cut the pieces just right!I thought the fabric would be OK to wear these pants out in public, but they ended up looking too pajama-ish! That’s OK though, because now I have some super fancy pajama pants!

Tip of the Universe: If you have almost enough fabric, but not quite enough, try hoping for the best when doing pattern adjustments! I literally visualized and prayed to the universe that the adjustments I made to the pattern would work… With a little faith, anything is possible!

Finally, the last project for the house I sewed was our darling ironing board. The old cover was gross and old… This was a very easy project though. I pretty much traced a pattern around the ironing board and left a good 4 inches or so of seam allowance.

sew an easy ironing board cover

Then I folded the seam about an inch and sewed it down in order to leave a space for a cord to run through the seam, and left an inch wide opening to be able to pass the cord through. After attaching safety pins to the cord, I pushed the cord  through the seam and covered the ironing board. Pull tight and knot it at the end! Not so bad huh?!

sew an easy ironing board cover

Updating our home, one sewing project at a time!

Much love,

-Mensa